Відео

Hey Adam, i was wondering on your opinion on whether this is worth upgrading on my dmax, despite not having any major issue, i rotate my tyres every 7,500km so I don’t seem to notice any issue, but not sure if its a hidden issue, that I’m not going to see due to the regular rotation.

Thank You so much! Finally a Video of the same Switch i have and an easy and straight "How-To" so i can understand where the pins for! I'm working on a Ford Crown Victoria Police Interceptor and installing a new center console with these switches for a customized experience.

Although that seemed to work just fine, a bit of advice for others... in my experience (1 1/2 ball joints replaced) start with upper out, lower out, then lower in, upper in. Going in this order lets you use the tool the way *i think* it was intended, putting the pressure screw through the top hole to work on the lowers.

Waterproofing question for roof rack installation: Do I need to take additional steps to waterproof? If so, what?

Yes I think I saw that video from that website .lol nothing more that 2.5 tonne.

I bought the same switches for my camping trailer operating 8 led yellow lights, 1 6"x4" led cooking floodlight and 2 front and back white reverse sml flood lights.

Great video mate! Really need this. Thanksss

Is there a link to this product where its sold in the United States? Wanna get it shipped to Trinidad and Tobago 🇹🇹

is there a place where I can buy all of the wiring separately?

hello Adam im just about to ibuy and install a catch can to my 2018 mitsubishi triton ute thank you for the video ..... then in the near future will be looking at a tune up for fuel ecomy and a bit more power.....

Promo_SM

Hello, I am facing a problem with the device. I bought it from Amazon. When I wanted to install it, it does not work. It gives a signal on the Alpine screen and turns off. I do not know what the reason is. Is it from the factory or something else? I hope you can help me.

Adam been a while since have been seen you.

Definitely would love to win that as I have a couple of blindspots in my D-Max

After the cape york trip and other adventures, would you get this suspension again. Are you still happy with it now?

Great channel mate…. by chance have you upgraded the rear drums to discs.

Mate you are like me, go through a hundred different options to find one that actually works, well done.

Very helpful overview!

Had to come and re-watch as I’ll be installing a renegade tool box on the drawbar of the trailer to house the batteries, air compressor, 240v victron charger along side a 240v plug in outlet as well so if on a camp site with power can charge batteries etc. I’m doing something similar to the fan idea you had but it’ll be setup with a Digital Temperature Controller that will kick on when the temp inside the box becomes too warm and setup to turn on and off automatically it’s going to be interesting lol

Can I get it in India?if yes how much will it cost in India & can I fix it in my Isuzu v cross 2019 model

Bump steer class action now underway. Register at Chamberlains Law Sydney to be involved.

wow

Great video. Thanks for sharing

Hi mate. There is a revised fuel hose out now in regards to your chaffing issue.

Hey mate just be careful to not mount things on both the cab and the tub bc they flex independently and could break ur awning.

How easy it to take off?

High quality how to! Thank you for your good work my friend 🤝

Well done.

no snap ring to hold it in place after you installed it ?

can you attach awnings? or is that another bracket to roof rack?

CHECK-OUT THE FULL ISUZU D-MAX BUILD HERE -> ua-cam.com/play/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB.html

CHECK-OUT THE FULL ISUZU D-MAX BUILD HERE -> ua-cam.com/play/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB.html

CHECK-OUT THE FULL ISUZU D-MAX BUILD HERE -> ua-cam.com/play/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB.html

Hi mate, i had bolts leftover can't see where they should go Are they spare?

So I have a few questions if you will permit me. So is this something that can be left on all the time or are there times when it absolutely shouldn't be used, i.e. decelerating down a hill? You mentioned the potential fuel saving by not changing gears up and down particularly when towing, so I guess it begs the question. How many klm's / years would it take for the $1500 device to pay for itself?

Great step-by-step tutorial. Thank you, VideoShowMeHow.

Hello. Do you know if there is an option to change/set up a clock time in the car? I removed the stock radio from my car and putted in a chines one, and i need to set up correct time now

Thanks. You helped me with my decision. Buying one now 👍

Great vid, Looks like a good bit of kit also! Ill add it to the wish list. Be curious to see what it means for real world fuel consumption (compare before vs after) I think the BT ive got is getting 10-11L/100

Hey Adam thanks for the video, any reason you didnt apply the rubber underneath the canopy when installing?

Brilliant! You’ve just given me my next project.

Hey bro where can i buy the same ???!

Cheap as Chips🙈 Your Chippys expensive $60- $70 I'm debating spending £25 for Set.😔

Hey guys, This is totally not a hype-drive post, but for delivery in the next 2-3 weeks, we got 7 units left unallocated with the circuit boards we've had manufactured, after that it will be 3-5 weeks with a number between 10-100 available, then 5-8 weeks about the same number again. Unfortunately the kits are very hands on, with only hardware basics done in mass production, the bootloader, firmware and file configuration takes time and some physical assembly takes time. So if you want one sooner rather than later, I'd say you would probably need to get an order in within the next few days. I really don't enjoy creating any hype, but I've come across quite a few wanting things asap for trips coming up and it's just not a reality that can be accomplished. No complaints on my end, it's keeping me busy... All of my side projects have had to take a break to fulfil orders. The link is in the description Cheers

Thanks for the video Adam - this inspired me to install the same kit into my 2023 MUX... thinking it would all be pretty much the same... but I came across a few differences. One is that the console buttons are different - Isuzu opted for custom sized, asymmetrical blanks, so you can't swap buttons side-to side. They also opted for a really long microswitch board under the right side cluster, which meant I was limited to where I could put the dial control. A bit of careful dremmelling, though, and that is all in. Your guidance on a couple things was spot on, like 'put a little nick in the firewall gateway boot'. Def so not take it off - real pain to reconnect it! I also ran the wires all under the car, so put them in a 9mm split conduit - seems to be generally recommended practice. Cheers, Adam

Your video has sold me after viewing the video I ordered mine straight away can't wait till it arrives and I install it Thank you once again

Adam, love ya videos mate. My dmax came with trailer wiring installed. I have since wired a tow pro system. After which I saw the pre wired heavy blue and signal red near the ecu unit. Do you know where they return up the front of the ute? Want to use one as a signal for my dcdc charger ignition wire rather than run a new one.

The S15 in the back is so clean.

I got an 8" installed then realized I needed more so I sold it and now have the 10". Made a world of difference. I never crank mine to max setting. No need for it.. lol

Great Mod! Really should come stock!!